Universal remote control gal. How to set up a GAL universal remote control for a Samsung TV. Locking settings changes

If you lose your TV remote, you don’t have to worry about it. There are always universal remote controls on sale that, after a fairly simple procedure, can easily replace the original model. The process of connecting to the TV will take no more than 10-15 seconds. It is only important to know how to set up a universal remote control.

Device structure

The design of the universal remote control is no different from the original models. Both types of devices have buttons for selecting channels, adjusting sound, setting a timer, and others.

Typically, both devices run on the same AA or AAA batteries. If you use one remote control for a large number of devices, then the batteries will have to be changed more often than in a conventional model.

Some features of the internal device may determine which devices can be controlled and how to configure the universal remote control. Gal LM p001, for example, has the ability to quickly connect to TV and SAT. Some other models do not have this feature.

Comparison of the original remote control with the universal one

There is no external difference between the two types of control devices. They differ only in the set of functions.

The first and main difference is that universal remote controls can be connected to a large number of devices and devices. They can be used simultaneously. For example, using one universal remote control you can turn on a TV, air conditioner, stereo system and any other electrical unit that allows remote control. The remote control will also allow you to control home theater functions, satellite dish and cable TV.

In addition, the cost of a universal remote control is lower than the original model, and the service life is usually longer.

For owners of older TV models, such a universal device will be a lifesaver if the original controller is lost. Original remote controls for previous years' models are simply not produced.

Are they really universal?

Any remote control can be used with different models of TVs, players and air conditioners. Of course, there are exceptions. For example, what should you do if you can’t set up a universal remote control? How can I check if it fits a given device model? First, you need to look at the list of compatible models in the instructions for the remote control itself. If there are no instructions regarding this, and the connection cannot be established, the problem may be in both the remote control and the TV.

The versatility of remote controls is determined by the fact that, unlike original devices, which can be configured to work with only one device, they can simultaneously work with different devices from different manufacturers. At the same time, they do not have to be reconfigured every time.

How to set up a universal remote control

To establish a connection between your TV or other device and the universal remote control, you need to follow these steps:

1. Turn on the remote control and point it towards the device.
2. Simultaneously press the OK or SET button (depending on the remote control model) and hold for 3-5 seconds.
3. Enter the code corresponding to your device model.
4. Then press the TV button to make sure it is connected.

If for some reason the remote control does not connect to the TV, you need to do these steps again. The device code may have been entered incorrectly.

There is another way to configure the Huayu universal remote control. To connect such a device, you can use auto search:

1. Turn on the device you want to configure.
2. Press the SET button and then POWER.
3. Release the buttons simultaneously.
4. Press the POWER button again and release.
5. Check if the sound volume indication appears on the screen.
6. Press the SET button twice in a row.

Not all universal remote control models support the automatic search function. It is also possible that the auto search function is not supported by the TV model itself. Therefore, for some cases, there is only one way to configure the LM P001 universal remote control - manually.

Some brands have a quick search function. To connect in this way, you need to perform the following algorithm:

1. Turn on the device you want to connect to.
2. Press and hold the TV button for a while.
3. Release the button when the power indicator lights up.
4. Press and hold the MUTE button.
5. When the connection occurs, release the button.
6. It's easy to check the operation of the remote control - just change the channel or adjust the sound.

If none of the methods worked and the code specified in the instructions did not work, you can use the last method - sequentially searching through the code manually.

How to determine the TV code

Each device model has its own universal code, which allows you to connect a remote control to it. It comes in three, four and five characters.

For example, to find out how to set up a universal remote control for Samsung, you need to look at the code information in the instructions for your TV or air conditioner.

It is important to remember that you need to enter the code of the device being connected, and not the universal remote control.

Smartphones with universal remote control function

Some newer brands of phones allow you to use them as a universal remote control. As a rule, they can only be connected to TVs with the SMART TV function.

To set up a universal remote control on your smartphone, you will need to download a special application and follow the installation instructions that will light up on the screen. Using the program, you can interact not only with the TV, but also with other devices that allow remote control functions.

This useful feature is available for a limited number of smartphone and TV models. To use your phone as a remote control, both devices must have a Wi-Fi module, an infrared port, or Bluetooth connectivity.

Purpose of the buttons:

Power on/off button for the selected device (POWER).

Remote control setting button (SET).

Numeric buttons for direct channel selection (0...9).

Play button (PLAY).

Stop button (STOP).

PAUSE button.

Record button (REC).

Rewind button.

Fast forward button.

Mute button (MUTE).

- button for selecting a device to control (TV, DVD, SAT, AUX).

Volume control buttons (Vol-/Vol+).

Channel switching buttons.

Beginning of work:

Carefully, observing polarity, install two batteries in the special compartment. Alkaline batteries are recommended.

Remember to change your batteries at least once a year!

Configure the remote control to work with the necessary devices. There are several ways you can do this.

After saving the code, turn on your device and check the operation of all buttons on the universal remote control. If any buttons do not work properly, try a different code.

Entering the code manually:

Find your device brand from the list of brands in the table. Each device brand is associated with one or more four-digit codes. Press and hold the desired SET button, then press the device selection button, such as TV. When the indicator light comes on, release both buttons. The indicator remains lit continuously. Enter the four-digit device code. As each digit is entered, the indicator lamp flashes and after entering the fourth digit it will go out, and the code will be saved in the remote control memory. If the code you enter is incorrect, the lamp will blink twice and remain on until you enter the correct code.

Manual code search:

If you do not know the manufacturer of your device or cannot find its code, you can select the code manually. To do this, first press and hold the “SET” button, and at the same time press the button of the equipment you have selected, for example “TV”. When the indicator lights up continuously, release the buttons. Then press the “SET” button once again, the indicator will start flashing. Point the remote control at the TV screen and press the POWER button. Each time you press this button, the remote control sends a power-off signal, cycling through the codes sequentially in ascending order. While the signal is being sent, the light flashes at an increased frequency. When the required code is found, your TV will turn off. Press the button of the selected equipment “TV”, the indicator lamp will go out, and the code will be saved in the remote control memory.

Automatic code search:

Turn on the device of your choice, for example a TV, and point the remote control at it. Press the desired device selection button once, for example, “TV”. Press and hold the SET button and the POWER button. After three seconds, when the indicator light comes on, release both buttons. The remote control will begin sending a power-off signal, cycling through the codes sequentially in ascending order every two seconds. The light flashes while the signal is being sent. When the TV turns off, immediately press any button (except the SET button) to stop the automatic search. The indicator lamp will go out and the device code will be saved in the remote control memory.

After the cycle is completed, the indicator lamp on the remote control will go out and the search mode will turn off. The duration of the search cycle can be up to 30 minutes. Every time when You start the search, it starts with the last saved code. If you did not manage to stop the automatic code enumeration in a timely manner, you do not have to repeat the entire cycle again. Find out the current programmed device code, subtract a few units from it, enter the resulting value manually and then use the manual code search procedure. For example, you started automatically searching for TV. The TV turned off, but you stopped the search a little late, so the subsequent code, for example “1015,” was stored in the device’s memory. Manually program the code "1000". Then start the manual search procedure. If the required code is “1012”, then after the twelfth click on the “POWER”, the TV will turn off.

How can I find out the current programmed device code?

Press the button of the selected device on the remote control once, for example, “TV”.

The first digit of the code can be found as follows. Press and hold the “SET” button and press the “1” button at the same time. Release both buttons. If the first digit of the code is 1, the indicator will blink once. The absence of an indicator signal means that the code number is “0”.

Second digit. Press and hold the “SET” button and press the “2” button at the same time. Release both buttons. If the second digit of the code is “5”, the indicator will blink five times. The absence of an indicator signal means that the code number is “0”.

Third digit. Press and hold the “SET” button and press the “3” button at the same time. Release both buttons. If the first digit of the code is “7”, the indicator will blink seven times. The absence of an indicator signal means that the code number is “0”.

Fourth digit. Press and hold the “SET” button and press the “4” button at the same time. Release both buttons. If the first digit of the code is “3”, the indicator will blink three times. The absence of an indicator signal means that the code number is “0”. After saving the code, turn on your device and check the operation of all buttons on the universal remote control.

For some brands of TVs, the "POWER" has only the function of turning off the TV. To turn the TV back on, you must press any number button.

If your TV does not support certain features, such as the "MUTE" (mute), button "MUTE" on the remote will not function.

Code distribution table:

TV - 0000…0268, 0700…0746, 1000…1037.

DVD - 0269…0370, 0750…0754, 0524…0690, 3000…3018.

SAT - 0371…0523, 0800…0884, 2000…2024.

AUX, CD, DVD - 0524…0690, 3000…3018.

Specifications:

Working distance is at least 8 meters.

The transmission angle is at least 30 degrees.

Setting methods - manual or automatic search in the code database.

Dimensions (HxWxD) - 195x80x30 mm.

Net weight - 210 g

Five devices for simultaneous control.

Number of buttons 32.

Batteries AAAx2 pcs.

Purpose of the buttons:

Power on/off button for the selected device (POWER).

Remote control setting button (SET).

Numeric buttons for direct channel selection (0...9).

Play button (PLAY).

Stop button (STOP).

PAUSE button.

Record button (REC).

Rewind button.

Fast forward button.

Mute button (MUTE).

- button for selecting a device to control (TV, DVD, SAT, AUX).

Volume control buttons (Vol-/Vol+).

Channel switching buttons.

Beginning of work:

Carefully, observing polarity, install two batteries in the special compartment. Alkaline batteries are recommended.

Remember to change your batteries at least once a year!

Configure the remote control to work with the necessary devices. There are several ways you can do this.

After saving the code, turn on your device and check the operation of all buttons on the universal remote control. If any buttons do not work properly, try a different code.

Entering the code manually:

Find your device brand from the list of brands in the table. Each device brand is associated with one or more four-digit codes. Press and hold the desired SET button, then press the device selection button, such as TV. When the indicator light comes on, release both buttons. The indicator remains lit continuously. Enter the four-digit device code. As each digit is entered, the indicator lamp flashes and after entering the fourth digit it will go out, and the code will be saved in the remote control memory. If the code you enter is incorrect, the lamp will blink twice and remain on until you enter the correct code.

Manual code search:

If you do not know the manufacturer of your device or cannot find its code, you can select the code manually. To do this, first press and hold the “SET” button, and at the same time press the button of the equipment you have selected, for example “TV”. When the indicator lights up continuously, release the buttons. Then press the “SET” button once again, the indicator will start flashing. Point the remote control at the TV screen and press the POWER button. Each time you press this button, the remote control sends a power-off signal, cycling through the codes sequentially in ascending order. While the signal is being sent, the light flashes at an increased frequency. When the required code is found, your TV will turn off. Press the button of the selected equipment “TV”, the indicator lamp will go out, and the code will be saved in the remote control memory.

Automatic code search:

Turn on the device of your choice, for example a TV, and point the remote control at it. Press the desired device selection button once, for example, “TV”. Press and hold the SET button and the POWER button. After three seconds, when the indicator light comes on, release both buttons. The remote control will begin sending a power-off signal, cycling through the codes sequentially in ascending order every two seconds. The light flashes while the signal is being sent. When the TV turns off, immediately press any button (except the SET button) to stop the automatic search. The indicator lamp will go out and the device code will be saved in the remote control memory.

After the cycle is completed, the indicator lamp on the remote control will go out and the search mode will turn off. The duration of the search cycle can be up to 30 minutes. Every time when You start the search, it starts with the last saved code. If you did not manage to stop the automatic code enumeration in a timely manner, you do not have to repeat the entire cycle again. Find out the current programmed device code, subtract a few units from it, enter the resulting value manually and then use the manual code search procedure. For example, you started automatically searching for TV. The TV turned off, but you stopped the search a little late, so the subsequent code, for example “1015,” was stored in the device’s memory. Manually program the code "1000". Then start the manual search procedure. If the required code is “1012”, then after the twelfth click on the “POWER”, the TV will turn off.

How can I find out the current programmed device code?

Press the button of the selected device on the remote control once, for example, “TV”.

The first digit of the code can be found as follows. Press and hold the “SET” button and press the “1” button at the same time. Release both buttons. If the first digit of the code is 1, the indicator will blink once. The absence of an indicator signal means that the code number is “0”.

Second digit. Press and hold the “SET” button and press the “2” button at the same time. Release both buttons. If the second digit of the code is “5”, the indicator will blink five times. The absence of an indicator signal means that the code number is “0”.

Third digit. Press and hold the “SET” button and press the “3” button at the same time. Release both buttons. If the first digit of the code is “7”, the indicator will blink seven times. The absence of an indicator signal means that the code number is “0”.

Fourth digit. Press and hold the “SET” button and press the “4” button at the same time. Release both buttons. If the first digit of the code is “3”, the indicator will blink three times. The absence of an indicator signal means that the code number is “0”. After saving the code, turn on your device and check the operation of all buttons on the universal remote control.

For some brands of TVs, the "POWER" has only the function of turning off the TV. To turn the TV back on, you must press any number button.

If your TV does not support certain features, such as the "MUTE" (mute), button "MUTE" on the remote will not function.

Code distribution table:

TV - 0000…0268, 0700…0746, 1000…1037.

DVD - 0269…0370, 0750…0754, 0524…0690, 3000…3018.

SAT - 0371…0523, 0800…0884, 2000…2024.

AUX, CD, DVD - 0524…0690, 3000…3018.

Specifications:

Working distance is at least 8 meters.

The transmission angle is at least 30 degrees.

Setting methods - manual or automatic search in the code database.

Dimensions (HxWxD) - 195x80x30 mm.

Net weight - 210 g

Five devices for simultaneous control.

Number of buttons 32.

Batteries AAAx2 pcs.

The universal infrared remote control is designed to control televisions, DVD players, home theaters, satellite, cable, and terrestrial digital television receivers. Adapted for Tricolor TV satellite receivers. Built-in code base from various manufacturers. Code selection manually or automatically. Various ways to configure the remote control. Search by manufacturer name. Large database of codes from various manufacturers. Various ways to configure the remote control. Ergonomic button layout. To control four devices.
Devices with which the remote control works: TVs, LCD and plasma panels, projectors and projection TVs, DVD players and recorders, home theaters, VCRs, satellite, cable, terrestrial digital television receivers, various audio devices, code added for GS8300, GS8302, GS8304 receivers , GS8306, used in the Tricolor TV broadcasting system.
Technical characteristics: number of devices for simultaneous control - 4; number of buttons - 36; dimensions: 150x50x19 mm; weight - 46 net; Battery type - 2 AAA elements.

The appearance of the product may differ from its image in the online store.
The photo shows a sample presentation/serving of the product.
The quantity of goods when placing an order can be changed downward if the required quantity of goods is not available.

INSTRUCTIONS

BY SETTING

UNIVERSAL

USER MANUAL

UNIVERSAL REMOTE GAL

Model LM-LE008

Universal infrared remote control

capable of simultaneously managing eight devices,

such as TVs, LCD and plasma panels, projectors and projection TVs, DVD players and recorders, home theaters, VCRs, satellite, cable, terrestrial digital television receivers, various audio devices, etc. It contains a large database of codes for various devices, and also has a learning function.

Learning function refers to the procedure by which the remote control learns the infrared signals from other remote controls. When device codes are not included in the built-in database, they can be read from the original remote control.

Before starting work, please read the contents of this manual.

PURPOSE OF THE BUTTONS

The delivery set includes a universal remote control and operating instructions.

Buttons for setting up the remote control Buttons for selecting a device “POWER” button for turning off the power “MUTE” button for muting the sound Numeric buttons Button for switching external inputs Button for returning Menu button Confirmation button Menu navigation buttons Channel switching buttons Volume control buttons "Play" buttons "Stop", "Back", "Forward" Record button Channel scanning button SCAN MACRO Macro function button Teletext buttons Color context buttons LM-LE008 LM-LE008

POSSIBILITIES

Large database of codes from various manufacturers Several setup modes: selecting a brand in the remote control menu, manually entering a code, automatic code search, training using the original remote control.

Ability to control eight devices simultaneously Macro buttons Backlit LCD display Clock

EQUIPMENT

Remember to change batteries at least once a year

Instructions

INSTALLING BATTERIES

Open the battery compartment cover by releasing the latch. Carefully, observing correct polarity, install two AAA batteries into the battery compartment. If the remote control has not been previously configured to work with your devices, you must complete the setup procedure. Programming data is stored in the device memory when there is no power. Therefore, if the remote control has already been configured, you only need to set the current time.

–  –  –

CONFIGURING THE REMOTE

Before programming the remote control, turn on the device for which the settings will be made. If it is a VCR or DVD player, then load a cassette or disc into it, respectively.

–  –  –

SELECTION OF CODE BY MANUFACTURER

Press and hold the SET button, then press the button to select the device to control, such as TV. Release both buttons. When the brand name appears on the display, use the cursor buttons to select the brand of your device, for example, Philips. Check the function of the buttons, for example +CH- or +VOL-. If the buttons do not control the device or do not work correctly, select another code using the cursor buttons or.

When the desired code is found, click OK to save the setting. After saving the code, SUCCESS will briefly appear on the display.

–  –  –

CODE SEARCH If your brand is not in the list or you cannot select the required code, it is recommended to use the search mode. In this mode, the remote control sends a control signal to the device, sequentially going through the codes.

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Then click OK. Use the cursor buttons or to select DEV SEARCH and press OK. Press the desired device selection button, for example, TV. Then click OK to start searching. When your device responds to the remote control command, press any button to stop the search. Check the operation of the buttons. If they work correctly, click OK to save the code.

If necessary, repeat the search operation, which will begin with the last stored code.

–  –  –

TRAINING THE REMOTE

The learning function allows you to supplement the functional buttons of the universal remote control with specific functions of some original remote controls that are not included in the built-in database.

–  –  –

Press the button to select the device for which training is being performed, for example, TV. Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the LEARNING menu item and press the OK button. Use the cursor buttons or to select the LEARN KEY menu item, then press the OK button. When SELECT KEY appears on the display, press the button on the universal remote control that you want to learn, for example, MENU.

The remote control will go into standby mode (WAITING on the display). Press and hold the corresponding button on your original remote control. When the command is read, SUCCESS will appear on the display. If FAILED appears on the display, this means that the command was not recognized. The training procedure must be repeated. To exit to normal mode, press the device selection button, for example, TV.

If necessary, train other buttons.

–  –  –

ERASING TRAINING DATA

Press the button to select the device for which you want to erase, for example, TV. Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the LEARNING menu item and press the OK button. Use the cursor buttons or to select the DELETE KEY menu item, then press the OK button. When SELECT KEY appears on the display, press the button you want to clear. When SURE DELETE appears on the display, press OK to confirm. If necessary, repeat the operation for other buttons. To exit to normal mode, press the device selection button, for example, TV.

ERASE ALL LEARNING DATA FOR A SELECTED DEVICE

Press the button to select the device for which you want to erase, for example, TV. Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the LEARNING menu item and press the OK button. Use the cursor buttons or to select the DELETE DEV menu item, then press the OK button. When SELECT DEV appears on the display, press the selection button for the device whose learning data you want to erase. When SURE DELETE appears on the display, press OK to confirm.

After successful erasing, SUCCESS will appear on the display within one second. To exit to normal mode, press the EXIT button several times.

ERASE ALL TRAINING DATA

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the LEARNING menu item and press the OK button. Use the cursor buttons or to select the DELETE ALL menu item, then press the OK button. When SURE DELETE appears on the display, press OK to confirm. After successful erasing, SUCCESS will appear on the display within one second. To exit to normal mode, press the EXIT button several times.

ADDITIONAL FUNCTIONS SETTING THE CLOCK

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the CONFIGURE menu item and press the OK button. Use the cursor buttons or to select the TIME SETUP menu item, then press the OK button. To select hour, minutes, AM/PM, use the or cursor buttons. Use the number buttons to enter the time. Select AM/PM mode using the cursor buttons or. Once entered, press OK to confirm.

To exit to normal mode, press the EXIT button several times.

SETTING VOLUME PRIORITY

This function allows you to determine the main device that controls the volume. For example, if an amplifier is selected as the main device, then the +VOL- and MUTE buttons control the amplifier directly, regardless of the selected device.

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or LM-LE008 to select the CONFIGURE menu item and press the OK button. Use the cursor buttons or to select the VOL LOCK menu item, then press the OK button. Use the device selection buttons to identify the main device, such as AUX (amplifier). Use the cursor buttons or to select ON to set the priority, then press the OK button to save. To disable priority, select OFF. To exit to normal mode, press the EXIT button several times.

Only one device can be designated as master.i.

ADJUSTING THE LCD CONTRAST

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the CONFIGURE menu item and press the OK button. Use the cursor buttons or to select the CONTRAST menu item, then press the OK button. Set the contrast value using the cursor or buttons, then press OK to confirm. To exit to normal mode, press the EXIT button several times.

TURNING ON THE DISPLAY BACKLIGHT

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the CONFIGURE menu item and press the OK button. Use the cursor buttons or to select the LIGHT menu item, then press the OK button.

Use the cursor buttons or to select ON to turn on the backlight, then press the OK button to save. To disable priority, select OFF. To exit to normal mode, press the EXIT button several times.

LOCKING CHANGES OF SETTINGS

Once the lock is enabled, the stored device code cannot be changed.

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the CONFIGURE menu item and press the OK button. Use the cursor buttons or to select the DEV LOCK menu item, then press the OK button. Press the button to select the device to be blocked, for example, TV. Use the cursor buttons or to select ON to enable the lock, then press the OK button to save. To disable the lock, select OFF. To exit to normal mode, press the EXIT button several times.

MACRO BUTTON

The macro button allows you to replace the sequence of several presses of different buttons with one operation. To send a macro command, you must hold down the MACRO button and press one of the preprogrammed buttons 1, 2 or 3. The maximum number of presses in one macro command is 10.

For example, to play a DVD, you must turn on the player and TV. Next, the TV input must be switched to an external source.

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the MACRO menu item and press the OK button. Use the cursor buttons or to select the macro command number 1,2 or 3 and press the OK button. When the display shows SETUP, press OK to record the sequence of keystrokes.

Press DVD, Power, TV, POWER, AV in sequence. Next, click OK to save the macro command. To exit to normal mode, press the EXIT button several times.

LM-LE008 To delete a macro command, press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the MACRO menu item and press the OK button. Use the cursor buttons or to select the macro command number 1,2 or 3 and press the OK button. When the display shows SETUP, use the cursor buttons or to select DELETE and press OK. To exit to normal mode, press the EXIT button several times.

CHANNEL SCAN

The function allows you to sequentially switch channels on your TV or receiver. To do this, press and hold the SCAN button for 4 seconds.

When SCAN appears on the display, release the button and point the remote control at your device. The remote control will begin sending switching commands, and the indicator lamp for the selected device will blink. To stop scanning, press any button.

SHUTDOWN TIMERS

The timers function allows you to turn off a specified device either at a certain time (3 timers) or after a set interval.

Shutdown timer at a specified interval.

Press the button corresponding to the device you have selected, for example TV.

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the TIMER SET menu item and press the OK button. Use the cursor buttons or to select the SLP TIMER menu item, then press the OK button. When MINUTE 00 appears on the display, use the number buttons to set the desired time interval from 0 to 99 minutes. Click OK to confirm. The display will show OFF (timer off). Use the cursor buttons or to set the value to ON (timer is on) and press OK to confirm. To exit to normal mode, press the EXIT button several times.

When the set time arrives, the universal remote will send a shutdown signal to the selected device. For example, at 12.23 PM the sleep timer is set to 23 minutes for TV. At 12.46 PM the remote control will turn off the TV.

Shutdown timers at specified times.

Press the button corresponding to the device you selected, for example, TV.

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the TIMER SET menu item and press the OK button. Use the cursor buttons or to select the TIMER 1 (2 or 3) menu item, then press the OK button. Next, enter the timer timer. To set the hour, minutes, AM/PM, use the or cursor buttons. Use the number buttons to enter the time. Select AM/PM mode using the cursor buttons or. Once entered, press OK to confirm. Use the cursor buttons or to set the value to ON (timer is on) and press OK to confirm. To exit to normal mode, press the EXIT button several times.

–  –  –

RESET TO FACTORY SETTINGS (RESET)

Restoring to factory settings clears the device memory and deletes customization data. This may be necessary if the device is not working properly.

Press and hold the SET button for 3 seconds. When CODE SETUP appears on the display, release the button. Use the cursor buttons or to select the CONFIGURE menu item and press the OK button. Use the cursor buttons or to select the CLEAR ALL menu item, then press the OK button. When the display shows SURE CLEAR, press OK to confirm. 9LM-LE008

–  –  –

WARRANTY

The warranty period is 6 months. from the date of sale.

The warranty does not apply to products that have suffered mechanical damage.

For any warranty issues, please contact your local dealer.

Product service life is 3 years.

Made in China.

Manufacturer: Shenzhen New Solutions Electronics Co., Ltd. No. 19, Xiangshan Avenue, 3 Industrial District, Luo Tian Community, SongGang Street, Bao An District, Shenzhen, China NOTE.

Due to the constant improvement of design and technology, changes may be made to your device that are not noted in these instructions and do not worsen its parameters. The manufacturer reserves the right to change technical specifications and software. In this regard, the implementation of some functions may differ from the description in this