Where is the monitor profile stored? Instructions for profiling printers
You need to right-click on the free space on your desktop, select Properties from the context menu and go to the Options tab. There is a button labeled “Advanced”, clicking which will open the monitor properties window. To manage color profiles, use the “Color Management” tab. The Add button will allow you to select the file containing the color rendering settings you want.
To set a color profile, you need to first open Control Panel by selecting the appropriate option from the menu on the Start button. Then first click on the “Printers and other equipment” link, and then click on the “Printers and scanners” link. This will open a window with a list of installed printers. Right-click the device you are interested in and select Properties. The printer settings panel also has a “Color Management” tab, and a new color profile is also installed using the “Add” button.
Some fidelity-related software, like physical devices, requires a color profile to be installed. For example, in the Adobe Photoshop graphics editor, the corresponding one is placed in the “Editing” menu section and is called “Color Adjustment”. The keys SHIFT + CTRL + K are assigned to this item. In the color settings window, you can select from installed profiles or add new ones using the “Load” button.
Sources:
Printers can operate in different modes that vary quality and speed print, as well as efficiency. In addition, during operation they wear out and become dirty, which deteriorates the quality of the resulting printouts.
Instructions
If you are using a dot matrix printer in text mode, use this to change the quality print buttons located on its front panel. When switching to NLQ (Near Letter Quality) mode, the machine is slower, but higher quality than in Draft mode, and the ink consumption per page is increased.
When using a dot matrix, inkjet or laser printer in graphic mode, run the utility (the method for launching it depends on the OS you are using). Select , then in its settings select the desired compromise between speed, quality and cost print.
Remember that in any machine, regardless of its design, not only cartridges, but also engines have a finite resource. With low quality print Paint, ink or toner are used up more slowly, but the motors have to run at higher speeds, causing them to wear out faster.
If the laser printer begins to print faintly with white streaks, shake it horizontally. After this, you can print several dozen more pages. After this, it must be replaced or refilled.
For laser cartridges, use only workshops that can clean them with a vacuum cleaner, even if they are more expensive. Replace the cartridge with a new one after three or four refills, and return the old one (some workshops even buy them).
Contrary to manufacturers' claims, inkjet printers work and last longer if a continuous ink supply system (CISS) is used. This is due to the fact that when using it, air does not enter the tubes, as is the case when changing cartridges. Use only high-quality ink with such systems. Remember that even in light they fade much faster than the original ones, so protect prints from direct sunlight. To prevent the print head from drying out, use the printer regularly.
A printer color profile is a file with an icc or icm extension. It is intended for color correction. Typically, such files are included in printer installation kits. How to create a color profile for a printer that fully suits your needs?
Instructions
Use a pre-made color profile to create a new one. Creating from scratch is always more difficult than adjusting. Therefore, take the standard color profile that came with your printer, or download an updated version from the Internet. Perhaps it will satisfy all your requirements, which in itself will save you from the need to create a color profile for the printer.
Check out the new color profile. To do this you need to install it. Do the following. Go to the Start button menu, then Control Panel. In the window that appears, find the “Printers and Scanners” icon. Double-click on it with the left mouse button. A window will appear in front of you containing a list of all printers connected to your computer.
Select the desired device, right-click on it. Select "Properties" from the context menu. The printer settings panel will appear in front of you. Find the Color Management tab. Find the "Add" button. To make a color profile, click on it, then select the desired file. The color profile will be added.
Therefore, first install Photoshop, and only after that install the Color Dark Room program. It will be useful if you need to adjust the color for another type of paper on which one or another color is poorly displayed, and also, using an automatic diagnostic system, it will help you choose the optimal color profile for your printer. Using the advanced settings of this program, you gain greater color adjustment capabilities and can easily adapt to almost any print material.
Sources:
- Creative Suite * Working with color profiles
A color profile contains the data needed to convert color range values. This includes information such as hue, color range, saturation, and others. The color characteristics of devices are transferred from color profiles to the color management system. To create a color profile for your printer, you need to follow several steps.
Instructions
The color profile for the printer is installed from the Printers and Faxes folder. You can open it in one of several ways. Click on the “Start” button in the lower left corner of the screen with the left mouse button or click on the Win button (with the Windows logo) on the keyboard. In the menu that opens, select “Printers and Faxes”.
If the folder you are looking for is not in the Start menu, call Control Panel. In the classic display of the “Control Panel” folder, find the “Printers and Faxes” icon among others and left-click on it. If the panel is displayed by category, look for the icon you need in the Printers and Other Hardware category. Also in this category the task “Show installed printers and faxes” is available, you can select it.
In the folder that opens, right-click on the icon of the printer that you want to associate with the color profile and select “Properties” from the drop-down menu, a new dialog box will open. In it, go to the "Color Management" tab and click the "Add" button to open the additional "Add Profile Mapping" dialog box.
In the window that opens, from the list provided, select a new color profile that will be associated with your printer and click on the “Add” button in the lower right corner of the window. Click the “Apply” button in your printer properties window for the new settings to take effect. Close the window by left-clicking on the OK button or on the "X" icon in the upper right corner of the window.
Working with a device such as a printer is easy and simple. At home and at work, it allows you to solve many problems. But when you buy a printer, you need to configure it correctly. Only in this case is the correct operation of the device guaranteed. Among the popular models, you can most often find printers from Epson. Therefore, many owners are wondering how to configure Epson MFPs.
Drivers compatibility
The best option is when the computer, after connecting the printer to it, automatically installs the drivers. This significantly speeds up and simplifies setting up the MFP. But such automatic installation does not always happen.
If automatic installation does not occur, you will need to download the drivers yourself. When downloading, make sure that the selected drivers match the version of the operating system installed on the computer. The same drivers are suitable for the most common operating systems (WindowsXP and Windows7). If after installing them the printer does not work, then you need to remove all programs that are associated with the device. Then clean the registry, and then repeat the installation from the beginning. After this procedure, everything should work quickly and reliably.
Wireless Wi-Fi network
Many MFP printers, in particular Epson, have the ability to connect to a computer via a wireless network. It is convenient, practical and modern, but it is connected
When the printer has a Wi-Fi function, you need to find and select the corresponding icon on the display and click on it. After this click, a search will begin for all Wi-Fi networks that are available in this location. After selecting the required network, enter the password. After this, a window will appear in which you can see a network status report. By the way, this report can be printed. If there is no such need, then the device request will have to be refused. After this, you can send any documents to the printer without additional wires and other puzzles.
These are the main nuances regarding how quickly you can set up an Epson MFP. Often, the device comes with detailed instructions for setting it up. If there are no instructions, you can always go to the printer manufacturer’s website for them.
If any problems arise, do not try to resolve them yourself, but be sure to contact the developer’s support service or service center.
Sources:
- How to set up an MFP using Epson as an example
Improving image quality using the side buttons on the monitor is not always enough to ensure that the indicator is at the peak of good display. The built-in calibration tool in Windows 10 will allow you to make sure that your monitor can show much better. For content producers, the main thing is to make sure that the work appears on other devices with the same standard quality. For regular users, viewing movies and photos will be improved. Before calibrating your monitor in Windows 10, reset your monitor settings to factory settings and turn off the lights in the room to avoid glare.
Where are the monitor calibration settings?
1 way. Since Windows 10 is updated and the location of the settings changes all the time, I decided to add two ways to enter the Monica calibration parameters.
- Open " Options"and just write in the search" Monitor color calibration".
- After opening a new window, proceed to the bottom method "How to adjust colors using the color calibration tool".
Method 2. Right-click on your desktop and select Display Settings.
In the window that appears, click "Advanced display options."
Here we come to the two parameters that we need: “Color Management”, “Color Calibration”. Let's look at these two parameters in detail below.
How to use color management in Windows 10
To calibrate your monitor in Windows 10, you need to use "color management", which shows preset profiles for your monitor. The "Devices" line shows the profiles of all connected devices to the computer and associated profiles. The "All Profiles" tab displays all available profiles. Select several options to see how they appear. For truly accurate results, you can create a color profile using the Color Calibration feature.
How to Adjust Colors Using the Color Calibration Tool
To adjust colors and calibrate your monitor in windows 10, you need to use the monitor buttons to adjust specific color aspects. Drag the welcome window onto the calibration monitor. Even if you have several monitors of the same brand and model, you need to configure them individually. Click Next.
The wizard shows that gamma controls the amount of light emitted from a particular color. By clicking "next" you can use the slider to make adjustments.
Achieve minimal visibility of small dots in the center of each circle, as the master tells us.
Brightness and contrast will be adjusted from your buttons on the monitor. Some monitors have buttons that immediately adjust the brightness and contrast, while on others you will need to go into the menu on the monitor and select these two options there. To start setting up, click next.
Adjust the brightness level so that the shirt does not blend into the suit, and the X is barely visible, as the master suggests.
Adjust the contrast according to the middle pattern as recommended.
With color balance, colors should not "bleed" into gray tones. Click next to adjust.
Drag the sliders to calibrate the colors.
You can now switch between the previous calibration and the current one. If everything is satisfactory, click done, otherwise click cancel to cancel.
Troubleshooting problems that may arise
If the colors still don't look right, then most likely your video card has failed or your monitor needs to be replaced. Try connecting another monitor to your computer and check. If the problem persists, you will need to replace the video card or check it by replacing it with another one. Correctly calibrating your monitor in Windows 10 will significantly improve the quality of work for photographers, videographers, graphic designers and creative individuals. Improves the quality of images and computer games.
When working with digital images, we sooner or later encounter issues related to color reproduction. The most common of them are: “Why does the same picture look different on different monitors?”, “Why do I see different colors when printing, not the same as on the monitor?”, “Why, after uploading to the Internet, the picture began to look like not like in Photoshop?”...
All these questions are relevant to the topic of our article. Let's try to figure them out.
Each display device can reproduce a specific set of colors (this is called the device's color gamut, or gamut in English). The color gamuts of different devices may differ markedly, and colors outside the overall gamut will not be displayed equally on two devices. For example, the monitor may display some colors that are not available to the printer, and vice versa. As a general rule, monitors display light, bright colors better (this is due to the fact that the image on them is backlit!). Moreover, the color gamut of different models of the same type of device (for example, monitors) can also vary greatly.
Color gamut of an average inkjet printer. The picture is quite conditional, because... the same printer will have different coverage depending on the ink and paper used.
**Standard color spaces
In order to bring certainty to working with color, abstract color spaces were “invented” - not tied to specific devices. There are three most famous and widespread abstract spaces: * sRGB. This is a fairly narrow space, so almost any monitor can display all of its colors. The sRGB color space is the de facto standard for the Internet (and for printing images in many darkrooms); * Adobe RGB (1998). This space is much wider, and accordingly, there are fewer color distortions during work. It is well suited for preparing images for printing. However, it must be taken into account that not every monitor is capable of displaying all the colors of this space. * ProPhoto RGB. Its color gamut is so wide that it includes colors that are not perceived by the human eye and do not even exist in nature at all!
Comparison of color gamuts of abstract color spaces.
Color field - area of visible colors
A reasonable question arises - so what space should you choose for work?
**Preparing images for publication on the Internet
If you plan to upload your processed images to the Internet or print them in a darkroom, be sure (!) to convert them to sRGB space. The fact is that many browsers believe that all images should be in sRGB, and if the picture is in a different profile, the color will be noticeably distorted.
If you're working in Photoshop, this is done with the menu command Edit > Convert to Profile. From the variety of options on the list Target Space need to choose sRGB(see picture).
Another option is to save images with the command File > Save for Web, in this case in the save dialog (on the left) you need to check the box Convert to sRGB.
If you use Lightroom, then in the export dialog you should also set sRGB- this setting is performed in the section File Settings.
If you use another editor, you also need to set the settings there in the same way.
**When are wider spaces needed?
If you use a monitor with a wide color gamut, or print your photos on high-quality photo printers or photo presses like Durst, it makes sense to save your work in the wider Adobe RGB space. But keep in mind that the visual difference will not be visible in all scenes (compared to sRGB).
**To summarize, unless you have a compelling reason to use other color spaces, it makes sense to work in sRGB.
Improving image quality using the side buttons on the monitor is not always enough to ensure that the indicator is at the peak of good display. The built-in calibration tool in Windows 10 will allow you to make sure that your monitor can show much better. For content producers, the main thing is to make sure that the work appears on other devices with the same standard quality. For regular users, viewing movies and photos will be improved. Before calibrating your monitor in Windows 10, reset your monitor settings to factory settings and turn off the lights in the room to avoid glare.
Where are the monitor calibration settings?
1 way. Since Windows 10 is updated and the location of the settings changes all the time, I decided to add two ways to enter the Monica calibration parameters.
- Open " Options"and just write in the search" Monitor color calibration".
- After opening a new window, proceed to the bottom method "How to adjust colors using the color calibration tool".
Method 2. Right-click on your desktop and select Display Settings.
In the window that appears, click "Advanced display options."
Here we come to the two parameters that we need: “Color Management”, “Color Calibration”. Let's look at these two parameters in detail below.
How to use color management in Windows 10
To calibrate your monitor in Windows 10, you need to use "color management", which shows preset profiles for your monitor. The "Devices" line shows the profiles of all connected devices to the computer and associated profiles. The "All Profiles" tab displays all available profiles. Select several options to see how they appear. For truly accurate results, you can create a color profile using the Color Calibration feature.
How to Adjust Colors Using the Color Calibration Tool
To adjust colors and calibrate your monitor in windows 10, you need to use the monitor buttons to adjust specific color aspects. Drag the welcome window onto the calibration monitor. Even if you have several monitors of the same brand and model, you need to configure them individually. Click Next.
The wizard shows that gamma controls the amount of light emitted from a particular color. By clicking "next" you can use the slider to make adjustments.
Achieve minimal visibility of small dots in the center of each circle, as the master tells us.
Brightness and contrast will be adjusted from your buttons on the monitor. Some monitors have buttons that immediately adjust the brightness and contrast, while on others you will need to go into the menu on the monitor and select these two options there. To start setting up, click next.
Adjust the brightness level so that the shirt does not blend into the suit, and the X is barely visible, as the master suggests.
Adjust the contrast according to the middle pattern as recommended.
With color balance, colors should not "bleed" into gray tones. Click next to adjust.
Drag the sliders to calibrate the colors.
You can now switch between the previous calibration and the current one. If everything is satisfactory, click done, otherwise click cancel to cancel.
Troubleshooting problems that may arise
If the colors still don't look right, then most likely your video card has failed or your monitor needs to be replaced. Try connecting another monitor to your computer and check. If the problem persists, you will need to replace the video card or check it by replacing it with another one. Correctly calibrating your monitor in Windows 10 will significantly improve the quality of work for photographers, videographers, graphic designers and creative individuals. Improves the quality of images and computer games.
When working with images, many have come across the concept of “color profile”. Where did it come from? By definition, a color profile is a set of data that describes a color input or output device (monitor, printer, etc.). Profiles define appearance requirements through mappings between color spaces and PCS (Profile Connection Space). The profile relationship space can be XYZ or LAB, and the correspondences are usually specified by tables or "maps".
When we talk about a color profile, we mean a profile whose format has been approved by the ICC (International Color Consortium). It includes almost all well-known companies that are related to graphics: Adobe, Apple, Kodak, Microsoft, Silicon Graphics, Taligent, Canon, DuPont, Fuji, Xerox, Intel, Sony, Epson, Hewlett Packard and many others.
The goal of the consortium was to develop a generally accepted standard describing the color parameters of devices. It is noteworthy that the ICC standard can be used equally successfully on different operating systems.
As you know, an image has a specific set of pixels, each of which has its own color in the RGB system. This data can be presented digitally. This is how we get an RGB color map. When storing information, a pixel is stored in the form of three numbers, and during playback we receive specific coordinates.
The fact is that each device has its own color reproduction, so some coordinates in the new system may be missing or displayed incorrectly. Accordingly, the color map had to be averaged and standardized. This is how the sRGB space appeared, in which each coordinate is assigned a specific color. Today, all monitors and printers are oriented towards sRGB.
With the development of technology, new spaces have appeared: Adobe RGB, ProPhoto RGB and others, but sRGB still remains the standard for representing the color spectrum in the RGB model. But this is just a theory. Let's look at a standard situation that often occurs in practice. You make pictures in Photoshop for display on the Internet (for example, on a blog). Question: What do you do when saving an image?
Probably, many will simply click on “save as” and select a format (most likely PNG), and the resulting image will be uploaded to the blog. This is not always correct, because the transmission link is the browser. Despite your preset color profile, most browsers display images in sRGB by default.
For more correct color reproduction, it is advisable not to assign any color profile to the image in Photoshop, and then save it for viewing on the Internet (save for web function), while checking the “convert to sRGB” checkbox.
Initial option:
This is what we get when converting to sRGB:
Is the difference noticeable?
The picture was not chosen by chance. Connoisseurs of Fourier series will probably understand what's going on. This was just a small excursion into the university's past. :)
In conclusion, I want to say that, in my opinion, this problem occurs quite often. Perhaps due to the fact that when working with graphics, amateurs rarely pay attention to details that are essential for professionals (which I definitely am not one of). I hope that this information may be useful to someone as additional knowledge. At least for me at one time it turned out to be so.
How do you solve the problem with profiles? It's probably a lot deeper than what I've presented here. Share your recipes.