Как установить MiFlash и драйверы для смартфонов Xiaomi. Как установить MiFlash и драйверы для смартфонов Xiaomi Установка приложения MiFlash

After some impressive devices in , Xiaomi has now entered in real Phablet market by launching a huge starting at the price of 1499 Yuan / $230 / Rs. 15350 approximately and goes up to 1999 Yuan / $305 / Rs. 20450 depending on the variants. The new Mi Max sports a 6.44 inch Full HD IPS 2.5D curved glass display with 1000: 1 contrast ratio, 72% NTSC color gamut and it offers 1920 x 1080 pixels resolution.The phablet comes out of the box running Android 6.0 Marshmallow based all new MIUI 8 with so many new features you surely gonna like.

Xiaomi Mi Max comes with a circular Fingerprint scanner placed at rear facing which is easily accessible and it supports Hybrid Dual SIM allowing you to use MicroSD in the second slot. Xiaomi has powered the phone with Hexa-Core Snapdragon 650 and yet another variant that comes with Octa Core Snapdragon 652 processor. There are also variants in RAM and storage, i.e. 3GB RAM with 32GB and 64GB storage and the other variant with 4GB with 128GB storage. All these variants can be expanded using microSD card. The phablet also has Adreno 510 GPU for better graphics and gaming.

In the camera department, Xiaomi Mi Max carries a 16 Megapixel rear camera with dual-tone LED Flash, PDAF and f/2.0 aperture allowing you to capture amazing pictures and videos. For Selfie fans, it has a 5 Megapixel front facing shooter with 85-degree wide-angle lens, and f/2.0 aperture. Mi max is a 4G LTE with VoLTE enabled smartphone also supporting 3G, Wi-Fi 802.11ac (2.4 / 5GHz) MIMO, GPS + GLONASS and Bluetooth 4.2. It is packed with 4850mAh battery and comes with Full metal Unibody design.

Xiaomi Mi Max Specifications:

• Android 6.0 Marshmallow based MIUI 8
• Hybrid Dual SIM (micro+nano/microSD)
• Fingerprint sensor
• 6.44 inch Full HD IPS 2.5D curved glass display with 1000: 1 contrast ratio, 72% NTSC color gamut
• 1920 x 1080 pixels resolution
• Hexa-Core Snapdragon 650 / Octa Core Snapdragon 652 processor
• Adreno 510 GPU
• 3GB RAM with 32GB or 64GB storage / 4GB with 128GB storage, expandable memory with microSD
• 16 Megapixel rear camera with dual-tone LED Flash, PDAF and f/2.0 aperture
• 5 Megapixel front facing camera with 85-degree wide-angle lens and f/2.0 aperture
• 4G LTE with VoLTE, Wi-Fi 802.11ac (2.4 / 5GHz) MIMO, Bluetooth 4.2 and GPS + GLONASS
• 4850mAh battery

Xiaomi USB Drivers creates a valid connection between Xiaomi device and Computer/PC (Windows 7/8/8.1/10/XP) . Users can easily view their files, transfer media by installing these drivers on your computers. It is quite simple to install USB Drivers , just locate your device model number and tap on “Download “. Now extract the download file and install the drivers. With USB Drivers installed on Windows and Mac , users have the option to transfer files & documents with ease from smartphone to PC and vice-versa. Not only this, whenever users try to flash the firmware or , Xiaomi USB Drivers are much needed. That’s why we’re here with downloads links of all Xiaomi phones & tablets followed by proper installation guide.

Xiaomi USB Drivers are also essential while connecting your smartphone in Fastboot Mode & Emergency Download Mode . These are special modes in every Android smartphone mainly booted whenever you perform the flashing process.

Xiaomi USB Drivers – Features & Benefits

Android USB Drivers are useful in several optional functions. Let’s have a look one after another.

• Transfer Data from Mobile to PC and vice versa.
• Flashing Stock Firmware / Custom ROM
• Unlock Bootloader
• Root your device
• Use the phone as a webcam

Compatible devices: The following Xiaomi Mi USB Drivers works with most of the MIUI 10 smartphones includes the Redmi Note 7 Pro, Redmi 6 Pro, Mi 9, Mi A2 Lite, Mi Mix 3, Poco F1, Redmi 5, Redmi Y2, Mi Max 2 , and more.

Download Xiaomi USB Drivers for Windows – Redmi and Mi Phones

Below is the list of various Xiaomi devices. Just find your device, and there is a download link of the driver next to every model. You can use CTRL + F to search for your device.

Xiaomi Mi USB Drivers Download:

Redmi USB Drivers Download:

Это подготовительная статья для инструкций по обновлению программного обеспечения смартфонов Xiaomi. Мы все прекрасно знаем, что театр начинается с вешалки, а работа с приложением — с инсталляции. Поскольку есть некоторые нюансы при установке приложения MiFlash и сопутствующих драйверов, то назрела необходимость описать процесс как правильно поставить программу MiFlash и установить драйверы для платформ Qualcomm и MediaTek.

Приложение MiFlash предназначено для установки образов прошивки в смартфоны производства компании Xiaomi, а также поможет восстановить устройство, если оно по каким-то причинам не включается или зависло на бутанимации и т.д. Программа работает со всеми аппаратными платформами, которые используются в смартфонах от Xiaomi. Поскольку драйверы, которые устанавливаются вместе с программой, не имеют цифровой подписи, то для их инсталляции необходимо отключить данную проверку в операционной системе Windows.

В данной статье в качестве операционной системы используется 64-битная Windows 10 Домашняя, а в качестве ПК — новенький планшет Chuwi Hibook. Все описанные манипуляции проверенны лично мной и никак не должны навредить вашему компьютеру. Однако, я, как автор данной статьи, никакой ответственности не несу. Все действия выполняются на свой страх и риск.

Отключение проверки цифровой подписи драйверов

Для отключения проверки цифровой подписи необходимо перезагрузить компьютер следующим образом: нажимаем Пуск -> Параметры и выбираем Обновление и безопасность .

В новом окне нажать кнопку Перезагрузить сейчас .

Для Windows 8 последовательность немного другая. Нажимаем Win+I и зажав кнопку Shift выбираем .

В появившемся меню Перезагрузки выбираем следующее: Поиск и устранение неисправностей -> Дополнительные параметры -> Параметры загрузки -> Перезагрузить. При загрузке компьютера необходимо выбрать 7 пункт, для этого нажимаем F7. После запуска переходим к установке приложения MiFlash и драйверов.

Установка приложения MiFlash

Установка драйверов для платформы Qualcomm

Скачиваем и распаковываем архив расширенных драйверов для платформы Qualcomm к себе на ПК. Запускаем пакет установщика для своей версии Windows. Выбираем наиболее подходящий вашим нуждам драйвер сети.

Нажимаем Next .

Внимательно читаем и подтверждаем лицензионное соглашение. Нажимаем Next .

Нажимаем Install для установки драйверов.

Процесс установки.

Want to unlock Mi max or want to connect any Xiaomi phone to the PC. So at this time you need a proper and working Xiaomi USB Drivers . If the right USB drivers for Xiaomi phones are not installed on you PC, then you will face a lot of problems like the device isn’t recognized on my computer, doesn’t recognize the device under fastboot mode, etc. So in simple words, xiaomi USB driver for windows are so important to lots of tasks on the phone. So to connect your MI Max, Redmi Note 3 and Any Other Xiaomi Phone to the PC you need the USB drivers. And most of the Xiaomi phone users are looking for these drivers and worries how to install the Windows PC. Don’t worry here is the complete tutorial which you can follow on your phone and install the latest and updated Xiaomi Drivers on your Windows PC.

This tutorial is only for the Xiaomi Phone users and works on any Xiaomi Phones whether it Mi Mix, Redmi 3S, Redmi Note 3, etc. All you have to run an exe file on your Windows PC and you are done. Simply download the package, install it and then use it to connect your Xiaomi device to your computer.

Table of Contents

Download Xiaomi USB Drivers For MI Max, Redmi Note 3

Once of the easiest way to setup, the USB drivers for Mi Phones on your Windows PC is to install the latest MI Phone Suite. Yes, this will install all the drivers for the Xiaomi phones on your Windows PC and run without any problem. We tested the same on our Windows 10 and successfully connects Redmi Note 3 and Mi Max to the Windows PC

Download MI Phone Suite to Install USB drivers

If the above mention method does not work you, don’t worry here is another way to setup the Xiaomi USB driver son your Windows PC. Xiaomi USB Drivers comes in .exe installer format (inside .zip file). Run the exe file on your system and reboot your PC and You are done.

If you are an owner of Xiaomi Mi Max 2 and looking out for usb drivers to connect your device with the computer then you have landed in the right page. Download Xiaomi Mi Max 2 USB driver from here, install it in your computer and connect your device with PC or Laptop successfully.

Here, we have provided two usb drivers for your Xiaomi Mi Max 2.

Download Xiaomi Mi Max 2 USB Driver

USB Driver Type:
USB Driver Purpose: For flashing Stock firmware on your device.
File Size: 11 MB

USB Driver Type: ADB Driver
USB Driver Purpose: For connecting your device to a computer.
File Size: 8.3 MB

Steps To Install Xiaomi Mi Max 2 Qualcomm Driver In Computer

Video Tutorial

Step 1: To get started, download the driver and extract it on your desktop.

Step 2: Open the extracted file, choose the setup type and click “Next ” in the setup wizard.

Step 3: Then, select “I accept the terms in the licence agreement ” and click “Next ”.

Step 4: Install ” in the InstallShield Wizard.

Step 5: Once done, click “Finish ” to complete the installation process.

That’s it. Your device driver is now successfully installed on your computer.

Steps To Install Xiaomi Mi Max 2 ADB Driver In Computer

Video Tutorial

If you don’t like this video tutorial or if you would like to get more instructions, then continue reading.

Step 1: To get started, download the driver and extract it on your desktop.

Step 2: Now, open Device Manager > Action > Add legacy hardware .

Step 3: Next, click “Next ” in the Add legacy hardware wizard.

Step 4: Now choose “Install the hardware that I manually select from the list (Advanced) ” and click “Next “.

Step 5: Once done choose “Show all devices “, click “Next ” and select the extracted file manually from your computer.

Step 6: Now to start installing your new hardware, click “Next ” again.