What can be printed on the printer. DIY gifts using a printer Useful printouts

Few people in our time do not know how to print on a printer, photocopy or even scan. In the age of modern technology, when almost everyone in the family has their own personal laptop in every home, there is hardly a person who cannot print a sheet of paper. But still, let's talk about how to print texts on a printer. It is quite possible that you do not know all the secrets of printing, or you simply have not had to deal with printing certain documents before.

Preparation

Before you start printing, you need to make sure that the printer is turned on and connected to a computer or laptop. Yes, it may sound funny, but sometimes people forget about it. You also need to make sure that the printer has enough ink (check the ID) or refuel the device, count the sheets of paper. It is better to put a little more sheets in general, because sometimes the printer can pull in several sheets at the same time, and if this is not noticed in time, then printing may be interrupted, and you will have to add paper and take additional steps to resume it.

Be sure to check the print quality by printing one test sheet from this or any other document. It is possible that you will need to clean the printer (done using the "Maintenance" tab in the print window). How to do all this, we will tell a little later.

Calling the print window

So, we checked the operability of the printer and the presence of its connection to the computer. Now let's go directly to how to print a Word document on a printer. First you need to open the print window. This can be done in several ways.

1. Find the print icon on the panel. This option is usually available in earlier versions. For example, in the 2003 Office package, the print icon is located exactly at the top of the panel and is quite noticeable.

2. Click "File" and select "Print" from the drop-down menu. This is a fairly well-known method used by most personal computer users. But it takes a lot of time.

3. Press the key combination Ctrl+P. Oddly enough, it is not known to everyone, although it is the fastest and simplest.

Setting the basic parameters

If you do not know how to print texts on a printer, then you should also remember what required parameters should be specified when printing ordinary documents.

1. Number of copies, if you need more than one copy of a document or sheet.

2. Pages you plan to print.

3. What kind of printing do you need - one-sided or two-sided.

4. Page orientation - portrait or landscape.

5. Sheet size - A4, A5, other.

6. The size and parameters of the fields.

7. Number of pages per sheet.

The default occurs on the page in one instance on one side. Orientation - portrait, A4 format. There is one sheet per page, and the document itself is printed from the first to the last page.

Printer Properties

For those who are learning how to print texts on a printer, it will be useful to know that when printing text, you can additionally set printer properties. It is not necessary to know this, but it is useful in some situations.

The main features of the printer include:

1. Print quality. By default - standard, but if the printer is already old and does not print clearly, it is recommended to set the quality to high.

2. Shades of gray. This property also increases the clarity of printing, especially if you are printing not text, but not quite successfully scanned material.

These two parameters are set in the "main" tab. Another useful thing is the "Maintenance" tab. Here you can clean and check the print nozzles, clean the rollers and tray, and select the silent mode of the printer. We advise you to pay attention to these properties, as they will be quite useful at the stage of printing preparation. After setting all the parameters, click the "Print" button directly in the main settings window, and the device will start working.

Two-sided printing

How to print texts and documents on a sheet on both sides? Especially for this, a function was created such as You can select it in the basic print properties. All odd pages are printed first. The printer then asks you to turn the sheets over and insert them into the printer (usually the sheets are placed in such a way that the beginning of the printed page is at the bottom). The program on the computer gives you hints on how to turn the paper over and insert it into the device. After that, click the "Print" ("OK") button in the dialog box, and the printer will print all the even sheets. So you get a finished printed document on both sides of the sheet.

How long does it take to print

The time it takes to print the text will depend on your printer. Each device has its own. Usually it is about 10 pages per minute, there are printers that work much faster. Again, it all depends on the manufacturer, model and year of manufacture. Tak also plays a significant role, home and office devices print at different speeds.

The older the model, the longer it takes to print. We also note that various system breakdowns also affect the speed and quality of this process. Therefore, if your printer was bought a long time ago and starts to fail, we advise you to replace it with a newer model. Otherwise, be prepared not only for slow, but also rather poor quality printing, errors such as jammed sheets, printing with streaks, and the like. For example, the printer may ask you to insert paper into the feeder even though it is still there.) Other minor annoying oversights are also possible, which almost double the print time.

Finally

So, we figured out how to print texts on a printer, what parameters you need to set when printing and where to find them, how to start printing text. We also found out that speed, as well as print quality, directly depends on the printer: its type and release date. It was determined that the older the device, the lower the speed and quality of printing and the higher the likelihood of various errors. We hope this information will be useful to you.

Three-dimensional printers are gradually flooding the world. Until a few years ago, designers and engineers would queue up for weeks to print their creations on such a device. And now anyone can create literally anything with a 3D printer. And today we will talk about 10 most unusual things created by aid 3D printing.

Designer shoe collection

In the summer of 2013, designer Janne Kyttanen printed a whole 3D printer on the Cubex Trio. Moreover, she posted software on the Internet so that any woman could print out a new pair of shoes almost every day.

The software allows ladies to customize shoes to fit any foot shape. So the painful process of choosing beautiful and comfortable shoes ceases to be relevant - in the future, each pair will become one.

Pistol Liberator

The world security system can be completely destroyed thanks to 3D printers. Indeed, quite real and functional copies of firearms printed on such devices have already begun to appear.

An example is , which can use cartridges with a caliber of 9x17 mm (.380 ACP according to American markings). Of course, these firearms have a lot of misfires, nevertheless, they are quite real and potentially dangerous.

The horror is that such a gun can be printed on almost any three-dimensional printer - it is assembled from several plastic parts and individual metal elements. And the company that developed the Liberator posted instructions for its production on the Global Web.

false jaw

Printing prostheses for injured people and animals on 3D printers is gaining great popularity. After all, it turned out that such products can be manufactured much easier, faster and cheaper on such devices than by the factory production method.

An illustrative example is the dentures, developed by a medical team from the University of Hasselt in Belgium. It was printed from plastic, steel, wax, silver, nylon, polycarbonate, steel, and photopolymers. The first owner of such a prosthesis was an 83-year-old woman with a destroyed by age and diseases of the lower jaw.

Airplane model

A team of enthusiasts from the University of Virginia 3D printed a copy of the aircraft. Of course, it has dimensions several times smaller than the original, but this device can really rise into the air and fly there, being remotely controlled.

This copy of the aircraft has a wingspan of 2 meters and can fly at speeds up to 70 kilometers per hour.

concert flute

MIT engineer Amit Zoran has 3D printed a replica of the famous Objet Connex500 flute that's so good you could even play with it at symphony orchestra concerts.

The Objet Connex500 flute printed on the printer consists of four parts, and in the process of its creation, human participation is necessary only when assembling the elements that came out of the printing device.

Facial prosthesis

Surprisingly, with the help of a three-dimensional printer, it is possible to print not only prostheses of individual bones and organs, but even faces. Of course, it will not be a movable and fully functional part of the head, but a printed element can cover a terrible wound left from an illness or injury.

An example is the story of an Australian Eric Mauger, who had a tumor the size of a tennis ball removed from his face by doctors. And in order to cover the wound formed after the operation, a “patch” was printed on a 3D printer for the patient, repeating all the subtleties of Eric’s lost appearance.

Dress for Dita Von Teese

Burlesque queen Dita Von Teese appeared in public in the spring of 2013 in an extravagant dress printed on a 3D printer. The author of this outfit was designer Michael Schmidt, and the product itself consists of seventeen different elements. Put together, they turn into a chic dress that perfectly fits the figure of a celebrity.

Three-dimensional dresses have the same advantages as shoes printed on a 3D printer - the same style can be adjusted to any figure and height before printing using a computer.

An American engineer named Jim Kor has 3D printed two models of a car called the Urbee over the past three years. Of course, only the body of the car was created in such an unusual way - the suspension and the engine were made separately in the traditional way from metal.

The Urbee 2 electric car can travel at speeds up to 65 kilometers per hour and has a 10 horsepower motor.

Lamps in the form of animals

Hunters like to decorate the walls of their dwellings with carved heads of animals they have killed while hunting. And the design studio Linlin & Pierre-Yves Jacques has found a way to create such interior elements without unnecessary cruelty and generally death. They created a collection in the form of heads of different animals - a deer, an elephant and a bear.

It is interesting that these delicate openwork lamps were printed by designers from white polyamide using a 3D printer.

The project called InMoov was started in 2012 by French fashion designer, sculptor and engineer Gael Langevin. He wanted to create a robot that would be a visual copy of himself. At the same time, the best way to achieve this goal, in his opinion, is to print the necessary elements using a three-dimensional printer.

Now InMoov is an international project with hundreds of people from all over the world working on it. Gael Langevin opened the program code and technical documentation of his robot, posted it all on the Internet and invited everyone to take part in the further development of the android.

As a result, InMoov turns into a universal robot, on which different groups of researchers work out technical innovations in many areas of applied science, including prosthetics.

Hello! Igor Zuevich is in touch, and today we will talk with you about how to make a printer a source of additional income. You will learn about whether it is possible to make money on a printer.

Many thought about additional income. Everyone wants to have a simple and profitable business, so that at minimum cost there is a maximum income. There are already created and tested ideas, and one of them is “How to make money at home using a printer?”.

The way to earn money

It consists in transferring various patterns to smooth surfaces in order to decorate them in an airbrush style. This method can be used to decorate tiles, laptops, mobile phone cases or the devices themselves, household appliances, canvases and the like. Many people want to have things with an individual design, so they are ready to buy such a service. The cost of the service is calculated based on the consumption of materials.

Watch the video: Common Instagram Mistakes

Equipment and consumables

The first thing you need to create designs is a computer and a color printer. When working with an inkjet printer, the second is thermal paper or photo thermal paper for thermal transfer of the image to the desired surface. Such paper can be purchased at office supply stores. The third is an ordinary household iron.

When working with a laser printer, the second is ordinary office paper, and the third is an aerosol clear varnish that can be bought at hardware stores.

Place of sale

Having found an idea, first of all, you need to determine the places of sale. Most likely, places where they may be interested in creating individual designs will be telephone and mobile phone stores, digital and home appliances stores, hardware stores (tiles, tiles) and interior design studios. They, in turn, can be offered a percentage for placing an ad. When the client base gathers up and word of mouth turns on, it will be easier to find customers.

Profit

The material and the place of sale have been found, it is imperative to calculate the “golden mean” of the price, since in this business everything depends on the size of the material spent on a particular picture. The price of paper for thermal printing (photo paper) is about 450-500 rubles for 10 sheets. Accordingly, the price should already be divided by 10.

So, 45-50 rubles price of 1 sheet. You can apply “as much as you like” on 1 sheet in order to completely fill it with ordered pictures, that is, about 6-10 illustrations, if they are designed for a small surface. After that, you need to calculate how much one picture will cost you, roughly speaking, if you place 10 illustrations per sheet. This 4.5-5 rubles, but it’s not worth starting to build a clientele with such a ridiculous price, because you will still have the cost of buying color cartridges and electricity costs. The average price is twice the price of consumables, that is 90-100 rubles. Approximately for a sheet it will be possible to receive from 700-900 rubles.

How it's done? How to transfer pictures?

You must certainly start with a “training”, that is, a little practice in translating pictures. From the first time it may seem difficult for some, but do not give up. In order to start this type of activity, you need to know the basics of working in Microsoft Word or Paint, in order to reduce the pictures and place them on 1 sheet.

And if you have knowledge of working in graphic editors, such as photoshop, UniConvertor, Corel Draw, picasa or Tux Paint, then you can additionally earn more on individual and unusual designs. It will also speed up the process of editing images.

To transfer the picture to the selected smooth surface, we need the picture itself printed on an inkjet printer and cut to size and a regular iron.

If you are going to apply text, for example, a company logo, then you need to turn it from left to right, otherwise it will not be readable after transferring it to the surface. You must always remember that any image will "mirror" if it is simply turned to the front side and transferred to the surface.

If there is a laser printer, then you first need to cover the surface on which the picture will be applied with varnish. And when working with a laser printer, the image is printed on plain office paper. After the varnish has completely dried, you need to cover the surface with it again and attach the pattern to the surface by fixing it with adhesive tape.

You need to attach the picture with the side on which the illustration is printed. After complete drying, you need to spray water on the paper and slowly roll it up, but the pattern will remain on the surface. Both of these methods are easy to reproduce, so there should be no difficulty.

Conclusion

How profitable is making money with a printer? Calculating earnings per sheet, amounting to 700-900 rubles, we can say that this business, with proper promotion, can bring good income. You will need to make 30 pictures per day, which is 2100-2700 rubles per day. You can consistently have 63,000-81,000 rubles per month, and this is for sitting at home.

As you can see, if you have a printer and free time, you can put it to good use by working just a few hours a day.As always, the main thing is to act correctly and you will succeed. It is better to act together and together with those people who already have experience and results. Come to our programs, at the same time and earn more!

With you,
- Igor Zuevich.

If the next 5 minutes you can invest in self-education, then follow the link and read our next article:

Liked? Click " I like"
Leave a comment on this article below

On the website of one of the most famous manufacturers of products for 3D printing, MakerBot, the work of gadgets is illustrated by the production of garden gnomes, and on the main page of the Shapeways 3D design library live not printed gadgets or at least guns, but cats. However, the possibilities of technology, which some call the root cause of the coming industrial revolution, do not stop there. Look At Me has collected models of 8 really interesting items that can be printed on a 3D printer.

1 Lens

The lens is not the easiest thing to 3D print, but at the same time effective and cheap to manufacture. Acrylic is used to print the lens itself, which is why the pictures (you can see them here) are not of very high quality - but for amateur opportunities this is still an outstanding result; however, the lens still has to be polished by hand. The lens can be customized to fit any camera.

2 loom

Although out of everyday use, but useful in the light of the general passion for manual labor, this particular printed loom is much inferior to the wooden one in terms of parameters - but it is quite suitable as a hobby. The author of the project complains that the machine took a lot of plastic and time; despite his conviction that there would be no more willing to try, almost one and a half thousand people became interested in the project. Warning: the author of the model did not bother to create instructions.

3 table lamp

One of the most popular properties in the MakerBot library - a table lamp with an extremely simple assembly scheme: you just need to print out all the parts and connect them together, and then put on a light bulb. The authors and users of the resource promptly respond to all complex cases and problems in the comments. The only negative is the small size of the lamp - although they can be explained by saving plastic, they make the lamp not very convenient to use.

4 Wall clock

A rare occurrence among the majority rather unsightly - admit it– printed objects: the author of the project took care of the appearance of the model, even giving it an external resemblance to the dashboard (dashboard) in Mac OS X. However, it will not be possible to print the clock mechanism - the author himself uses parts from Quartex. It is also interesting that this watch is a modest example of how you can make money on 3D printing: it is successfully sold on Etsy, like many other things printed by the same author.

5 Anemometer

An example of that how a 3D printer can be used to modify familiar and boring things - in this case, a bicycle computer was turned into a wind meter, forcing it to count not wheel revolutions, but revolutions of a propeller printed from plastic. Like most projects, the device is small in size - all spare parts fit on a banknote.

6 Case for Atari 2600

A solution for everyone who is sorry to throw away old cartridges from Atari 2600 - a full-fledged replacement for a failed case can be printed on a 3D printer. To do this, you need a fair amount of material, a printed circuit board and just one nail, which will connect all the parts together. According to the author of the model, the project appeared back in 2002, but before the appearance of the MakerBot Replicator, production was difficult.

7 Headphones

The problem is not the easiest assembly headphones, the author of the project decided with detailed instructions with links to sites where you can buy spare parts that cannot be printed - which is quite a rarity among developers. It is impossible not to note the pedantry of the author, who even indicated how much time it would take to produce each individual part, to the nearest minute.

8 Robotic chandelier

fantasy lamp(aka a robotic arm), which can change position depending on the needs of the user - it will take a lot of effort, time and attention, but it seems to be worth it. You can verify this by seeing it in action. Despite the fact that the author of the project avoids any social networks in every possible way, except for the library of Thingverse models, YouTube and the site with instructions Instructables, he willingly answers questions and comments in the comments to the project.

After making sure that the printer is connected, the drivers are installed and the device is working properly, you can start printing. Using the Word office program as an example, let's look at how to print text.

Open a ready-made text document or prepare it yourself, for which you need to copy or type text on Word sheets, then edit and format it.

Further actions, based on the Office version, may vary slightly.

In version 2010 the icon with the printer for quick printing is displayed on the quick access panel. Pressing it will help fast printing.

In Word 2003 you will also find the printer icon without problems.

IN 2013 Word version of the icon on the quick access panel is not initially available by default, but it can be easily added by clicking the drop-down list and selecting the item. There is an item below View if you want to preview the layout of the document.

You can also go to the window responsible for sending to the printer through the menu File/Seal.

In all versions, a universal combination will work ctrl-p. Next, go to the settings window. For the 2010 version it looks like this.

For 2003 So.

Here you can tune page range or specify specific numbers, select the number of copies, and specify the printer to send the document to. Among the many other settings, let's focus on setting color or black and white print. To go to the window for setting these parameters, open Properties.

Choose here Color and press OK for confirmation.

It should be noted that these actions similar for any program that works with text.

Printing a web page

There are two ways to do this. First - copy(Ctrl+C) the desired text from the web page and insert(Ctrl+V) in text editor(for example, the same Word). Then print as shown in the first paragraph.

The second way is to print directly directly from the browser.

The easiest way to do this is by pressing a keyboard shortcut. ctrl+p- a window will open settings. You can also open it using the menu button in the browser - Seal(example for Google Chrome).

Here, in settings, you can set all the same parameters as in a Word document with a slightly different interface, but quite intuitive.

How to print a picture

You can open the image print window without even opening it by selecting from the menu, after right-clicking on the icon, the item Seal.