Where to stick the film on your smartphone. Like a piece of glass! How to stick a protective film on your phone yourself so that it is not noticeable. Using tape

Hi all. Today I will teach you how to easily and simply stick a film on your phone without bubbles, dust and other nonsense. The instructions are suitable for both original films and universal ones that need to be cut out. So, let's get started.

Not everyone knows that protective film needs to be applied. Many people believe that the advent of scratch-resistant glass, called Gorilla Glass, keeps the display perfectly clean for its entire service life. Unfortunately this is not the case.

Modern screens really do well in the vicinity of keys in one pocket, but they are easily scratched by small particles of dust and other solid particles found everywhere, so we glue the film to the smartphone without hesitation.

How to stick a film on a phone.

If the film is universal, it must be cut to the size of the screen of your device before applying the sticker. Simply apply the film to the display, trace with a ballpoint pen and cut with regular sharp scissors. Try to avoid complex shapes - this will prevent you from ruining the film, and it will stick much better.

Little advice

When cutting out the film, keep it with the adhesive side up (the side with the red sticker) so that the edges will not peel off.

Wipe the screen with an alcohol wipe or glass cleaner or any other non-aggressive cleaner.

Don't worry about dust remaining on the display—it can be easily removed later. There is no need to invent anything to achieve sterile cleanliness. Somewhere on YouTube there was even advice that you need to lock yourself in the bathroom, turn on the hot water and then all the dust in the air will settle along with the steam - what nonsense!

Peel back the protective layer with sticker 1 and carefully apply the protective film to the screen.

In order to remove dust trapped under the film, use double-sided tape or special stickers, which are sometimes included.

You can buy protective film from 10 rubles with free delivery throughout Russia, and this is not China.

Well, for clarity, here’s a video on how to stick the film on your phone:

It is impossible to avoid bumps when placing the film on the device if there is a lot of dust in the room. If you do not prepare, micro-debris will stick to the surface of the protective coating and form bubbles that cannot be expelled. Therefore, before you start improving your phone or tablet, you need to consider the following:

• There is a lot of furniture, textiles and other dust collectors in living rooms - none of this suits us. The best place to stick the film is the kitchen or bathroom. True, you will have to take out all the towels, tablecloths and rugs.
• In the dry air, light dust particles float everywhere. This means you need to work with a spray gun. The dust will get wet, become heavier and fall to the floor.
• Wipe all horizontal surfaces with a damp cloth and wash the floor. Done, the room is dust free.

Step 2: Prepare your tools

Now place the tools on the prepared surface. In addition to the device and protective film, we will need:

• display cleaning liquid, antistatic agent or regular alcohol,
• credit card or thick plastic card,
• microfiber cloth (often included with film),
• stationery tape.

Before work, remove your hair, choose suitable clothing and wash your hands with soap. This way we will minimize the risk of extra dust particles appearing.

Step 3. Prepare a protective film

If you purchased a film specifically for your device, skip this step. If you bought a universal version, you will need to work with scissors or a stationery knife. But first, determine the exact contours of your phone or tablet in the most convenient way:

• If there is still the factory film that covered the newly purchased device, stick it on top of the marking grid and cut it out according to the outline.
• Photocopy your phone. The life-size image will allow you to perfectly fit the film to its shape.
• Place a sheet of universal film on top of the gadget and mark the edges with a marker or felt-tip pen.
• Cut the film at a distance of approximately 1 mm from the edge of the screen. This will help place the protective cover evenly on the phone.
• After shaping the film, do not forget to make holes for the buttons and speaker.

Step 4: Degrease the screen surface

Using display cleaner, antistatic agent or alcohol, the phone screen. Use a microfiber cloth to remove all small dust particles. After this procedure, do not touch the screen with your fingers or touch the sleeves of your clothing.

Step 5. Apply the film

Each screen protector consists of three layers, the top and bottom are labeled 1 and 2. The first layer is removed to bond the film to the phone. The second is to reveal the final glossy or matte finish.

• Turn the film side one down and align it with the device screen. Check that all bends and technical holes match.
• Take a deep breath, make sure your hands are not shaking, and peel the first layer from the protective film. From now on, do not touch it with your hands, hold it at the edges.
• Carefully stick the film to the screen, starting from the edge (narrow or wide) and helping yourself with the edge of the plastic card.

• Gradually place the film completely on the screen. Use a card to push out any air bubbles that form from the center to the edges. Since we have taken all measures to remove dust from the work area, there will be no bubbles that cannot be expelled.

• When finished, remove the second layer from the protective film.

Step 6: Remove missed dust particles

If unfortunate specks of dust do get on the screen, stationery tape will help remove them. Cut two strips from it. Use one piece of adhesive tape to lift the protective film, and use the second to remove the dust.

All that remains is to put the film in place and re-level it with a plastic card.

Ready! Surgery complete, you are amazing! Now you can take your phone or go to the beach without fear: nothing will damage the screen of your fashionable device.

The screen for a modern smartphone is, without exaggeration, everything. It is necessary for any operations. At the same time, the screen is a rather vulnerable and poorly protected place. This article will talk about how to stick a film on your phone to protect the screen and what you will need to complete this operation.

What is it for?

Smartphone displays tolerate close proximity in pockets or bags, for example, with metal objects or keys, but can easily be scratched by small particles of dust or other hard parts found everywhere.

An important phone accessory

A film or protective layer on the phone screen is the only way to not only avoid minor scratches, but also acts as an additional defensive line when it falls. By taking the full blow, it significantly reduces the likelihood of ending up with a broken or cracked display. Therefore, a protective film for a smartphone is an urgent need - you can glue it without much thought.

What should you protect your smartphone from?

Three main problems encountered when gluing

Let's consider the difficulties that may arise:

1. Smooth gluing. There are individuals with a precise eye and iron fine motor skills for whom the gluing process will not pose any problems. There are also those “lucky ones” for whom plus or minus a “kilometer” is mere nonsense. Many people want to get the perfect gluing result, but this is very difficult to achieve - the film always lies crookedly.
2. Dust on the phone screen under the protective layer. Such a factor as “dust” will always and everywhere exist. The only thing that can be done is to reduce its accumulation in the surrounding air. It will not be possible to completely get rid of it. When gluing, you always need to be vigilant and make sure that there is no dust on the smartphone screen.
3. Air bubbles. Another serious nuisance that can only cause trouble. One inattentive “step” – and that’s it, you get a bubble.

As you can understand, sticking a protective film on the display of a smartphone or telephone yourself at home is quite difficult. But nothing is impossible. The step-by-step instructions below will help you easily complete such difficult and precise work.

How to stick a protective film on your phone?

Let's consider the procedure.

Preparing the premises

It will not be possible to reliably and efficiently glue the protective screen layer when there are a lot of dust particles “flying” in the room where this procedure is taking place. Dust on the screen under the protective layer will cause bubbles to form.

Therefore, before you start upgrading your mobile device, you should consider the following:

• You should not beautify your mobile device in residential areas that contain a lot of upholstered furniture and textiles. It is best to do this in the bathroom, if conditions permit, or in the kitchen. True, it will be necessary to remove household items from the premises in advance.
• There are always specks of dust floating in the air of the room. It will be necessary to use a spray bottle before gluing - drops of water from the spray bottle will cause the dust particles to settle.
• Horizontal surfaces, including the floor, should be wiped with a wet cloth.

Now that's it! The room is ready for work.

Preparing tools

Basic Tools

Tools are laid out on the prepared surface. The work will require:

• A dense thin object, without sharp edges. A bank card will also do.
• Stationery tape.
• Napkin.
• Liquid for wiping computer displays.

Preparing the protective film

All protective films are divided into model and universal.

With model types of films, gluing work is greatly simplified. If you purchased such a film that is suitable for a specific smartphone model, you can skip this step.

You will have to tinker a little with universal types of films. Before gluing, you will first need to give it the dimensions of the phone screen and make holes.

Methods for marking contours:

• Using factory film. If you manage to save it, it is glued to a protective film. Next, using a sharp object, you need to cut out an exact “copy” according to its outline.
• Making a “copy” of a phone. You need to prepare a life-size photocopy of your smartphone. Then attach a universal film to the paper copy and carefully trim it.
• Marking on the smartphone screen. Place the film on the device display. Use a felt-tip pen or marker to mark the edges. Connect the resulting points with lines. Trim off all excess.

Important! It is advisable to cut the protective film at a distance of 1 mm from the edge of the screen on each side. This will allow you to place it more accurately on the phone. When performing circumcision work, you should use a sharp utility knife and a metal ruler. In order not to spoil the table, you should put a thick magazine, notebook or cutting board under the film.

• Additional holes. After the cutting is completed, you should make holes for the speaker, buttons and camera (if any). It is convenient to use a hole punch to make a hole for the front camera.
• Cleaning the display surface. Using a cloth moistened with liquid for wiping displays, you must thoroughly clean the smartphone screen from grease stains, dirt and dust. After this procedure, you should not touch the screen with your hands or touch it with the sleeves of your outerwear. Then you can proceed to the most basic thing - we begin to glue the protective film on the smartphone.

Pasting

All films have three layers. The top and bottom – protective or transport layers – are marked with the corresponding labels: “1” and “2”:

• By pulling the tab “1” you need to remove the first layer. After this, under no circumstances should you touch the adhesive surface of the film. It should only be held at the sides.

Accuracy is the key to success

• Carefully apply the film to the screen, starting from any edge. “Drive out” the resulting air bubbles with the edge of the plastic. Direction – from the center of the display to the edges. So, slowly the entire surface of the display is covered.

Removing dust particles

Otherwise, if dust particles managed to get onto the screen, two small pieces of tape will help remove them. Using one strip, the protection element is lifted and held, and the other strip removes dust particles.

The film is placed in place. It is re-aligned using a plastic card. Then you need to remove the second protective layer (if present), marked with the label “2”.

The protective film is pasted. Now the smartphone screen is not in danger.

Smartphone manufacturers try to equip their products with high-quality scratch-resistant tempered glass screens, but it is not always possible to avoid them. Even Gorilla Glass or Asahi Dragontail are not always able to withstand some fractions of sand that have a high hardness on the Mohs scale. To ensure that the display does not become unsightly and remains clearly readable, you have to resort to the use of auxiliary accessories. How to stick a film on a phone at home without allowing bubbles to appear will help you find out the material.

For many popular smartphones, protective films are produced that are specially cut to fit the shape of the screen. They follow its contours, have holes for the speaker, camera, and physical buttons on the front panel. However, for some devices (especially inexpensive Chinese ones) it is not easy to find “native” protection. You have to resort to preparing the universal film yourself.

Before you buy a protective film, you need to decide on its type. Both glossy and matte options are available on sale. The first ones are characterized by maximum transparency; the finger glides over them pleasantly, but a side effect is a tendency to glare. Matte ones are less transparent, but they protect against glare. Also a bonus is the reduction of matrix grain on low-resolution (below HD) screens.

To choose a film, you need to set priorities and find out what is more important: maintaining brightness or protection from glare. In the first case, you should choose gloss, in the second, a matte surface. Also, when purchasing a universal film, you need to take into account the screen diagonal.

Preparation for gluing

Before you apply the universal film, you need to prepare it. To do this you will need the following tools and accessories:

The film preparation procedure is as follows:

• Take measurements from the display and transfer them to the film using a ruler. You can safely draw the contours with a marker, since the film is covered on both sides with protective films, there will be no marks left.
• Place the film on the mat, apply a ruler to straight contours and moderate pressure, with a clear movement of the scalpel/blade, make cuts. It is not recommended to use scissors for this (there will be burrs that will prevent the edges from sticking tightly).
• If there are curly outlines that need to be trimmed, use the curly arc of a protractor to trim them.

After this, the film is ready for gluing. If the phone has contours that require a shaped cut (for example, Samsung, with an oval home button), but you don’t want to do them, you can simply cut the film straight so that it covers the display itself, but does not reach the keys under the screen.

How to apply protective film yourself

There are two ways to stick the film on your phone without bubbles: “dry” and “wet”. The first of them is fast and safe, but requires more skill. It also requires clean conditions without dust in the air. The “wet” method is fast, but can pose a threat to the smartphone in inexperienced hands.

Dry method

The dry method is most often used for gluing film. This is the one that is recommended, but it is associated with certain difficulties. Before you stick the film on your phone, you need to choose a clean place. For example, a bathroom is suitable for this: humidity makes the dust heavy, and it does not fly in the air, but lies on the surfaces.

Tools and accessories:

• lint-free napkin;
• plastic card;
• tweezers(optional) or medical gloves(optional);
• wiper(optional).

Often, screen film comes with these tools, so you don’t have to look for anything.

How to stick the film dry:

An experienced person (for example, a store or service center employee) can do without tools by gluing the film on the first try. But if this is done for the first time, it’s better to play it safe.

The use of a protective sticker is associated with some special features. Gluing without taking them into account will result in a film with bubbles. When you try to re-stick it, small particles are attracted to the sticky surface and contaminate the screen.

What is special about the process?

The first step is to choose a good film. The range of goods is quite extensive, as are their prices. Don't go for cheap. Inexpensive stickers are usually of low quality. Pay attention to the manufacturer. It is better if it is a well-known, reputable brand.

Another important factor before filming without is preparation. It must be thoroughly cleaned. To prevent new particles from getting in, it is advisable to do this in the bathroom. The air here is quite humid, which makes cleaning easier.

During the cleaning process, it is prohibited to use aggressive substances. For these purposes, a special rag is sold complete with the film. It helps clean the screen from dirt and dust.

For the smallest particles, use tape. First, stick it on the screen, then sharply tear off the tape.

The display must be dry before gluing. It is not allowed to stick wet film. This can lead to damage to the gadget itself.

The film must be applied gradually, starting from the edge. To do this, bend its protective part and begin gluing it to the screen, carefully smoothing it out. Gradually move in the opposite direction.

To make it easier to align the film on the screen, apply a soap solution. To do this, add a drop of liquid soap to 20 g of liquid. Apply a layer with a brush. Try to keep it very thin.

Don't worry if you didn't succeed in sticking the film the first time. This will be a useful experience that will help you avoid making mistakes the next time you try.